Seminar and training tables solve a different space-planning problemrnfrom full-width banquet tables. Buyers need a useful writing surface,rnbut they may also need to fit multiple rows into a classroom, conferencernroom, hotel or event venue.
BESTONE Thailand offers two narrow commercial HDPE folding-tablernformats for this purpose: the BTE-1872 at 180 cm long and the BTE-1860rnat 152 cm long. Both use a 45 cm-deep tabletop and a 74 cm workingrnheight, but the difference in length affects room layout, storage andrnthe type of program each model can support.
This guide compares only verified model information. Finalrnquantities, packaging, loading and project requirements should bernconfirmed through a model-specific quotation.
WhyrnNarrow Seminar Tables Are a Separate Buying Category
A conventional banquet table provides a wider surface for dining,rndisplays or group use. A seminar table uses a narrower top to create arnforward-facing workstation while conserving room depth.
This format can be useful for:
- Training rooms
- Schools and educational facilities
- Conference and seminar venues
- Corporate offices
- Hotels and meeting facilities
- Exhibitions and temporary event layouts
- Commercial or institutional projects
The 45 cm depth on both models gives buyers a consistent startingrnpoint for row planning. The choice between 180 cm and 152 cm should thenrnbe based on the required work surface, room dimensions, circulationrnroutes and storage conditions.
Verified Specifications atrna Glance
| Specification | BTE-1872 | BTE-1860 |
|---|---|---|
| Product type | 6 ft seminar / training folding table | 5 ft seminar / training folding table |
| Open size | 180 × 45 × 74 cm | 152 × 45 × 74 cm |
| Published tabletop or folded-panel size | 180 × 45 × 4.5 cm | 152 × 45 × 4.5 cm |
| Tabletop material | Blow-molded HDPE | Blow-molded HDPE |
| Frame | Powder-coated steel tube | Powder-coated steel frame |
| Published leg-tube detail | OD 25 mm / ID 23.5 mm | Confirm on project specification |
| Country of origin | Thailand | Thailand |
| Published internal test evidence | Request model-specific evidence | 200 kg internal static test dated 26 Aug 2026 |
The table is a sourcing comparison, not a substitute for the approvedrnspecification. Buyers should obtain the current revision for the exactrnorder configuration.
ChoosernBTE-1872 for a Longer Continuous Work Surface
The BTE-1872 measures 180 × 45 × 74 cm when open. Its 180 cm lengthrnprovides a longer continuous narrow work surface for training,rnconferences, classrooms and institutional use.
This format may suit buyers who:
- Want to standardize on a 6 ft seminar-table length
- Need longer continuous rows or work surfaces
- Have rooms that can accommodate the extra 28 cm per table
- Prefer fewer table joints across a planned row
- Need a narrow table for meetings, instruction or temporaryrnworkstations
The product page lists a blow-molded HDPE tabletop, powder-coatedrnsteel tube frame and 25 mm outside-diameter leg tube with a 23.5 mmrninside diameter. The published folded-panel dimension is 180 × 45 × 4.5rncm.
Buyers should still confirm the full folded configuration, stackingrnmethod and handling plan for their project. A longer table may providernmore surface area, but room access, elevators, storage racks andrntransport equipment also matter.
Choose BTE-1860rnfor More Compact Room Planning
The BTE-1860 measures 152 × 45 × 74 cm when open. It keeps the samern45 cm depth and 74 cm height while reducing the length by 28 cm comparedrnwith the BTE-1872.
This format may suit buyers who:
- Work with smaller training or meeting rooms
- Need more flexibility around columns, doors or irregular walls
- Frequently reconfigure layouts
- Want shorter units for handling and storage planning
- Operate schools, offices, exhibitions or event venues with multiplernroom sizes
The product page identifies a 152 × 45 × 4.5 cm HDPE tabletop and arnpowder-coated steel frame. Buyers should request the current productrnspecification for all controlled frame and hardware details.
The BTE-1860 also has a published 200 kg internal factory static-testrnrecord dated 26 August 2026. That evidence is useful for reviewing therntested sample and structural performance under the recorded conditions,rnbut it is not an independent third-party certified working-loadrnrating.
What the Two Models Have inrnCommon
Both models are designed as narrow seminar or training tables andrnshare several verified characteristics:
- 45 cm tabletop depth
- 74 cm open height
- Blow-molded HDPE tabletop
- Powder-coated steel frame construction
- Folding format for storage
- Applications in training, education, meetings, offices andrnevents
- Thailand manufacturing origin
- OEM and private-label project availability
Because the depths and heights match, a buyer may consider using bothrnlengths in the same facility. The 180 cm version can serve larger rooms,rnwhile the 152 cm version can fill shorter walls or compact spaces. If arnmixed-model program is planned, confirm color, appearance, height andrnpackaging alignment during sample approval.
Evidence and Load-TestrnBoundaries
Test evidence belongs to the exact model and configuration that wasrntested. The published BTE-1860 internal static-test result must not berntransferred to the BTE-1872 simply because the products share a similarrnuse case and tabletop depth.
For BTE-1860, the 200 kg figure is the applied load in an internalrnfactory static test. It is not a third-party certified working load.rnBuyers should use the approved product specification for buyer-facingrnload information.
For BTE-1872, procurement teams should request the evidence packagernneeded for their program. If a retailer, project or market requires arndefined standard or third-party laboratory report, that requirementrnshould be included in the RFQ and tied to the approved productionrnconfiguration.
This model-specific approach is especially important when buyersrnrequest changes to the tabletop, frame, hardware, color, labels orrnpackaging.
Room Layout and ProcurementrnChecks
Measure the operating layout
Do not select a table length from the product name alone. Create arnscaled room plan using the verified open dimensions. Include chairrnpull-back space, aisles, doors, columns, presentation areas andrnemergency routes.
The number of users per table should be validated by the buyer basedrnon the intended seating, equipment and local requirements. BESTONE doesrnnot recommend treating a generic seating count as a substitute for anrnactual room plan.
Buyers remain responsible for checking applicable fire, egress,rnaccessibility and facility rules in the installation market.
Plan storage and handling
Review the route from the storage area to the room. Importantrnquestions include:
- What are the door and elevator dimensions?
- Will staff carry tables individually or use carts?
- How will folded tables be stacked or racked?
- What is the available storage length and height?
- How frequently will the room be reconfigured?
- Is edge or surface protection needed during internal transport?
The shorter BTE-1860 may be easier to plan around constrained spaces,rnwhile the BTE-1872 offers a longer work surface. The best choice dependsrnon the complete operating system, not only the table itself.
Specify packaging andrnbranding
For wholesale, retail or project orders, provide the required unitsrnper carton, protection method, shipping marks, labels, barcode data andrnprivate-label artwork. Packaging can affect carton size, containerrnloading and handling performance.
MOQ, production lead time and container-loading quantity arernconfirmed for each inquiry because they depend on the model mix,rnconfiguration, packaging, order quantity and current productionrnschedule.
Which Model Fits Each BuyerrnType?
Training companies and schools
Choose based on classroom width, row spacing, storage and the amount ofrnwriting surface required. A mixed-length plan can help use irregularrnrooms efficiently.
Hotels and conference venues
Review how often rooms change between classroom, seminar and otherrnconfigurations. Handling routes and storage may be as important as openrndimensions.
Event-rental operators
Consider transport vehicles, carts, labor, setup frequency and storagerndensity. Confirm protective packaging or handling solutions for thernplanned distribution system.
Importers and distributors
Evaluate which length matches the target channel and whether the programrnrequires one model or a coordinated range. Use approved specificationsrnso customers understand the difference between the 180 cm and 152 cmrnformats.
Private-label retailers
Specify product claims, labels, instructions, carton artwork, barcoderndata, testing and inspection requirements before sample approval.
Procurement FAQ
Whatrnis the main difference between BTE-1872 and BTE-1860?
The main verified difference is length. BTE-1872 is 180 cm long,rnwhile BTE-1860 is 152 cm long. Both are 45 cm deep and 74 cm high whenrnopen.
Which model isrnbetter for a small training room?
BTE-1860 may offer more layout flexibility because it is 28 cmrnshorter, but the decision should be based on a scaled room plan, aislernneeds, user equipment, storage and local facility requirements.
Do bothrnmodels use HDPE tabletops and steel frames?
Yes. Both product pages specify blow-molded HDPE tabletops andrnpowder-coated steel frame construction.
Does thernBTE-1860 200 kg test apply to BTE-1872?
No. The 200 kg result is a model-specific internal factory staticrntest for BTE-1860. It is not a third-party certification and must not berntransferred to another model.
Can the twornlengths be used in the same project?
They may be considered for a coordinated layout because both use a 45rncm depth and 74 cm height. The buyer should confirm the approvedrnappearance, color, configuration and specification for each model.
Are MOQ, leadrntime and loading quantity published?
They should be confirmed for each inquiry. The result depends onrnmodel mix, product configuration, packaging, quantity and the currentrnproduction schedule.
Request a Project-SpecificrnQuotation
To compare BTE-1872 and BTE-1860 for a training, school, conference,rnhotel or distribution program, send BESTONE the room or channelrnrequirements, target quantity, destination, packaging, branding andrntesting requirements. BESTONE can then review the appropriate model andrnprepare a project-specific quotation.
Related Products and BuyerrnResources
Compare the BTE-1872rn6 ft seminar folding table and BTE-1860rn5 ft seminar folding table, then review the BTE-1860rn200 kg internal static test. Buyers can browse the full commercialrnHDPE folding furniture range, visit the BESTONErnThailand factory tour, or requestrna seminar-table quotation.